Wren and Cuff Pickle Pie B – Bass Distortion / Fuzz

Beschreibung

Wren and Cuff always had the idea of creating a fuzz pedal designed for the many distortion loving bass players out there. Some bass players already used the original Pickle Pie because of its reputation as a ‘guitar’ pedal, that could handle the low frequencies of the bass and give a nice spongy fuzz much better than most pedals of the Muff family, so Wren and Cuff went back to the drawing board and spent months on designing a bass fuzz, based on the DNA of the Pickle Pie. The Pickle Pie B bass fuzz features a FET buffered active clean-boost to avoid ‘drop-outs’, when you kick on the fuzz when playing live. The FET-hybrid clipping section creates a great sounding fuzz and helps the fuzz to mesh with the clean signal in a natural way, instead of just sitting on top of the dry signal like some fuzzers with clean blends can do. The tone-stack range of the Shape control was specifically adapted for bass with a much less pronounced mid-scoop which helps it to retain presence in a live playing situation. The control range of the Saturation (fuzz) knob makes the Pickle Pie B highly usable at lower gain settings and the pedal can go from a dirty, gritty, slightly over-driven clean-blended bass sound, to fully saturated, watch out for feedback, drop-C meltdown – and everything in-between.
– bass distortion / fuzz effects pedal
– adjustable clean blend mixes effect and original signal
– modified version of the Wren and Cuff Pickle Pie, specifically adapted for electric bass guitars
– FET buffered active clean-boost to avoid volume drop-outs
– FET-hybrid clipping section creates a great sounding fuzz and helps the fuzz to mesh with the clean signal in a natural way
– specifically adapted tone stack with a much less pronounced mid-scoop
– can go from a dirty, gritty, slightly over-driven clean-blended bass sound, to fully saturated, watch out for feedback, drop-C meltdown
– true hard-wire bypass
– controls for Volume, Shape, Saturation, Blend
– bypass footswitch
– status LED
– metal housing
– 6.3 mm mono in / output jacks
– power supply via 9V battery or optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center (battery is not included in the delivery)
– current draw 6.5 mA
– dimensions (L x W x H) 121 x 65 x 40 mm / 4.7″ x 2.6″ x 1.6″
– weight 284 g / 0.62 lbs
– made in the USA