Wren and Cuff Phat Phuk B – Germanium / JFET Bass Boost

Beschreibung

The Wren and Cuff Phat Phuk B is a dirty booster effects pedal specifically made for the bass guitar. It is not a clone of any other pedal and was designed to accommodate tunings down to a typical low B and can be used for even lower tunings. The Phat Phuk B is a JFET / germanium single circuit hybrid booster – a unique sounding pedal which adds a beautiful sheen to the top-end and a bit of grit to the overall tone. It’s a fantastic pedal for situations where you want a lift in your overall level, during a chorus or bridge for example, with a bit of bawdy bump via the germanium transistor. One nice feature is also the more modern JFET transistor at the input which keeps the pedal impedance-friendly when it comes to active bass pickups. While many clean boost pedals offer almost too much output boost, which makes it difficult to dial in the perfect amount due to the wide control range, the Phat Phuk B comes with a reduced Volume sweep. It is still capable to create a big amount of gain, but the trade-off is worth the extra control, which makes it easier to find the sweet spot for your equipment. Give the Phat Phuk B a try – its beauty is in its simplicity and most musicians will be surprised how often it’s on!
– dirt bass boost effects pedal
– JFET / germanium single circuit hybrid booster
– adds a beautiful sheen to the top-end and a bit of germanium grit to the overall tone
– modern JFET transistor at the input keeps the pedal impedance-friendly for active and passive electronics and pickups
– adapted control range makes it easier to find the sweet spot for your own equipment
– true hard-wire bypass
– controls for Volume (Boost)
– bypass footswitch
– status LED
– metal housing
– 6.3 mm mono in / output jacks
– power supply via 9V battery or optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center (battery is not included in the delivery)
– current draw 5 mA
– dimensions (L x W x H) 111 x 60 x 31 mm / 4.4″ x 2.4″ x 1.2″
– weight 198 g / 0.43 lbs
– made in the USA