The MXR M303 Clone Looper Pedal is highly engineered for incredible sound quality, comes packed with features in a pedalboard-friendly housing, and can be as simple or complex as your needs dictate. Whether you’re practicing at home, captivating audiences with improv compositions onstage, or weaving intricate sonic tapestries in the studio, the Clone Looper Pedal has you covered. Just plug in, power up, and start recording an unlimited number of layers – up to 6 minutes long – that will be stored even when the pedal is off. A super convenient LED gives you a flashing 4 count to the beginning of the loop so you can keep your overdubs tight. Loops can be stopped and started in an instant, and your most recent layer can be undone just as fast. Run effects to your heart’s content – with storage sample rates up to 88.2 kHz, so this little box will handle even high-gain distortion with ease. To keep your pre-loop signal intact, the MXR team also included an analog through-path. On top of that, the Clone Looper Pedal can be set for either buffered bypass or true bypass switching to accommodate your tone and signal needs. The Clone Looper Pedal also comes packed with options for sonic explorers, from changing up the speed of your loop – to double-speed (3 minutes of recording time) or half-speed (12 minutes) – to reversing it entirely. Connecting an MXR Tap Tempo Switch or a DVP volume pedal enables even more features. Pedalboard-friendly and built like a tank, the Clone Looper Pedal is easier to use and delivers higher fidelity signal reproduction than any other looper of its type!
– looper effects pedal
– record loops up to 6 minutes long
– unlimited dubs
– 44.1 kHz sampling rate
– loop storage rates up to 88.2 kHz
– true / buffered bypass (switchable)
– loops will be stored even when the pedal is off
– recorded loops can be played in double or half speed or completely reversed
– control for Volume
– REC/DUB and PLAY/STOP footswitch
– status LEDs
– metal housing
– 6.3 mm mono in / output jacks
– 6.3 mm CTR input for MXR M199 – Tap Tempo footswitch
– 6.3 mm EXP input for Dunlop DVP Volume (X) pedal
– power supply via included 9V DC adapter (Dunlop ECB003), 2.1 x 5.5 mm barrel plug, polarity (-) center
– battery operation not supported
– current draw 225 mA
– dimensions (L x W x H) 64 mm x 111 mm x 49 mm
– weight 0,31 kg
MXR M303 – Clone Looper, B-Stock
€ 179,00€ 165,00inkl. MwSt. zzgl. Versandkosten
B-Stock
Nicht vorrätig
Beschreibung
The MXR M303 Clone Looper Pedal is highly engineered for incredible sound quality, comes packed with features in a pedalboard-friendly housing, and can be as simple or complex as your needs dictate. Whether you’re practicing at home, captivating audiences with improv compositions onstage, or weaving intricate sonic tapestries in the studio, the Clone Looper Pedal has you covered. Just plug in, power up, and start recording an unlimited number of layers – up to 6 minutes long – that will be stored even when the pedal is off. A super convenient LED gives you a flashing 4 count to the beginning of the loop so you can keep your overdubs tight. Loops can be stopped and started in an instant, and your most recent layer can be undone just as fast. Run effects to your heart’s content – with storage sample rates up to 88.2 kHz, so this little box will handle even high-gain distortion with ease. To keep your pre-loop signal intact, the MXR team also included an analog through-path. On top of that, the Clone Looper Pedal can be set for either buffered bypass or true bypass switching to accommodate your tone and signal needs. The Clone Looper Pedal also comes packed with options for sonic explorers, from changing up the speed of your loop – to double-speed (3 minutes of recording time) or half-speed (12 minutes) – to reversing it entirely. Connecting an MXR Tap Tempo Switch or a DVP volume pedal enables even more features. Pedalboard-friendly and built like a tank, the Clone Looper Pedal is easier to use and delivers higher fidelity signal reproduction than any other looper of its type!
– looper effects pedal
– record loops up to 6 minutes long
– unlimited dubs
– 44.1 kHz sampling rate
– loop storage rates up to 88.2 kHz
– true / buffered bypass (switchable)
– loops will be stored even when the pedal is off
– recorded loops can be played in double or half speed or completely reversed
– control for Volume
– REC/DUB and PLAY/STOP footswitch
– status LEDs
– metal housing
– 6.3 mm mono in / output jacks
– 6.3 mm CTR input for MXR M199 – Tap Tempo footswitch
– 6.3 mm EXP input for Dunlop DVP Volume (X) pedal
– power supply via included 9V DC adapter (Dunlop ECB003), 2.1 x 5.5 mm barrel plug, polarity (-) center
– battery operation not supported
– current draw 225 mA
– dimensions (L x W x H) 64 mm x 111 mm x 49 mm
– weight 0,31 kg
Zusätzliche Informationen
B-Stock
MXR
M303 – Clone Looper
ProMusic
Ähnliche Produkte
MXR M300 – Reverb
inkl. MwSt.
zzgl. Versandkosten
Mehr DetailsMXR JHW2 – Octavio Fuzz – Authentic Hendrix ’69 Psych Series – Mini Limited Edition
inkl. MwSt.
zzgl. Versandkosten
Mehr DetailsMXR M199 – Tap Tempo
inkl. MwSt.
zzgl. Versandkosten
Mehr Details