Morley Hum Eliminator – 2 Channel Box, XLR/TRS

Beschreibung

The Hum Eliminator uses Morley’s custom in-house made Isolation Transformers to break loop antennas that cause ground hum and buzz. The Hum Eliminator also converts back and forth between balanced and unbalanced connections and prevents the cable to act as an antenna for noise. Simply place a channel of the Hum Eliminator on the cable connections between the two offending pieces of equipment. The Hum Eliminator will not affect the quality of the audio, it will improve it. Morley uses 1/4″ (6.3 mm) smart jacks that accept any combination of unbalanced (TS) or balanced (TRS) plugs. These are passive devices (no power required), in cold rolled steel housings, hand-soldered circuit boards and top quality components and hardware.
– 2-channel Hum Eliminator
– 1/4″ (6.3 mm) Smart Jacks and XLR jacks
– eliminates AC hum / 60 Hz buzz and noise while leaving all signal grounds intact
– passive operation (no power supply required)
– frequency response 20 Hz to 70 kHz at +/- 0.5 dB
– distortion less than 0.005% THD @ 1 kHz
– crosstalk better than -97 dB
– max. source impedance 1 kOhm, min. load impedance 10 kOhm
– dimensions (L x W x H) 120 x 82 x 44 mm / 4.75″ x 3.25″ x 1.75″
– Made in USA