EarthQuaker Devices Night Wire – Harmonic Tremolo

Beschreibung

The brand new Night Wire is an option rich harmonic tremolo pedal. What is harmonic tremolo? In short, the signal is split into high pass and low pass filters, then modulated with an LFO that is split 180 degrees. The Night Wire takes the traditional harmonic tremolo a few steps further by allowing the center point of both filters to be adjusted for different tones. The filter frequency has three modes: Manual, LFO and Attack. In Manual mode, the center point can be set to a fixed position with the frequency control. In LFO mode, the filters are continuously swept and the frequency control adjusts the speed. In Attack mode, the filters are dynamically swept according to pick attack and the frequency control acts as a range control, much like a standard envelope filter. The tremolo section has two modes, Manual and Attack. In Manual mode, the speed of the tremolo is governed by where the rate control is set. In Attack mode the speed is controlled by pick attack and the rate controls the sensitivity; the harder you pick, the faster the rate and vice-versa. It also features a cut/boost volume control, true bypass, relay based “soft touch” switching and is hand made in Ohio, USA.
– Harmonic tremolo pedal
– Separate high pass and low pass filters
– 4 Controls for Level, Depth, Rate and Frequency
– LFO split 180 degrees
– The center point of both filters can be adjusted for different tones
– Filter frequency with three modes Manual, LFO and Attack
– Tremolo section with two modes Manual and Attack
– 6.3 mm mono IN/OUT jacks
– True Bypass with relay based “soft touch” switching
– Status LED
– Metal housing
– Power supply optional 9V DC adapter 2.1 mm x 5.5 mm barrel plug, polarity (-) center
– Battery operation not supported
– Dimensions (D x W x H) 117 mm x 64 mm x 57 mm
– Current draw 78 mA
– Hand made in USA