The Hum Eliminator uses Morley’s custom in-house made Isolation Transformers to break loop antennas that cause ground hum and buzz. The Hum Eliminator also converts back and forth between balanced and unbalanced connections and prevents the cable to act as an antenna for noise. Simply place a channel of the Hum Eliminator on the cable connections between the two offending pieces of equipment. The Hum Eliminator will not affect the quality of the audio, it will improve it. Morley uses 1/4″ (6.3 mm) smart jacks that accept any combination of unbalanced (TS) or balanced (TRS) plugs. These are passive devices (no power required), in cold rolled steel housings, hand-soldered circuit boards and top quality components and hardware.
– 2-channel Hum Eliminator
– 1/4″ (6.3 mm) Smart Jacks and XLR jacks
– eliminates AC hum / 60 Hz buzz and noise while leaving all signal grounds intact
– passive operation (no power supply required)
– frequency response 20 Hz to 70 kHz at +/- 0.5 dB
– distortion less than 0.005% THD @ 1 kHz
– crosstalk better than -97 dB
– max. source impedance 1 kOhm, min. load impedance 10 kOhm
– dimensions (L x W x H) 120 x 82 x 44 mm / 4.75″ x 3.25″ x 1.75″
– Made in USA
Morley Hum Eliminator – 2 Channel Box, XLR/TRS
€ 229,00
inkl. MwSt. zzgl. Versandkosten
Morley
Lieferzeit: ca. 3-5 Tage
Verfügbar bei Nachbestellung
Beschreibung
The Hum Eliminator uses Morley’s custom in-house made Isolation Transformers to break loop antennas that cause ground hum and buzz. The Hum Eliminator also converts back and forth between balanced and unbalanced connections and prevents the cable to act as an antenna for noise. Simply place a channel of the Hum Eliminator on the cable connections between the two offending pieces of equipment. The Hum Eliminator will not affect the quality of the audio, it will improve it. Morley uses 1/4″ (6.3 mm) smart jacks that accept any combination of unbalanced (TS) or balanced (TRS) plugs. These are passive devices (no power required), in cold rolled steel housings, hand-soldered circuit boards and top quality components and hardware.
– 2-channel Hum Eliminator
– 1/4″ (6.3 mm) Smart Jacks and XLR jacks
– eliminates AC hum / 60 Hz buzz and noise while leaving all signal grounds intact
– passive operation (no power supply required)
– frequency response 20 Hz to 70 kHz at +/- 0.5 dB
– distortion less than 0.005% THD @ 1 kHz
– crosstalk better than -97 dB
– max. source impedance 1 kOhm, min. load impedance 10 kOhm
– dimensions (L x W x H) 120 x 82 x 44 mm / 4.75″ x 3.25″ x 1.75″
– Made in USA
Zusätzliche Informationen
Brand New
Morley
Hum Eliminator – 2 Channel Box, XLR/TRS
ProMusic
Ähnliche Produkte
Morley MTVAI-2 – Mini Steve Vai Bad Horsie 2 – Electro Optical Design
€ 319,00Ursprünglicher Preis war: € 319,00€ 250,00Aktueller Preis ist: € 250,00.inkl. MwSt.
zzgl. Versandkosten
Morley MTKIKO – Mini Kiko Loureiro Switchless Wah – Electro-Optical Design, Limited Edition, B-Stock
€ 299,00Ursprünglicher Preis war: € 299,00€ 215,00Aktueller Preis ist: € 215,00.inkl. MwSt.
zzgl. Versandkosten
Lieferzeit: ca. 1-3 Tage
Morley MTCSW – 20/20 Classic Switchless Wah
inkl. MwSt.
zzgl. Versandkosten
Lieferzeit: ca. 3-5 Tage