The T1802 is a type of bridge produced for Ibanez by Gotoh. It was introduced in 2018 along with the .
The T1802 is a dual-point tremolo with a pair of studs mounted in
the guitar body upon which a knife edge rests forming the fulcrum on
which the tremolo pivots. The height of the bridge can be adjusted by
turning the mounting studs in or out. The studs can be locked into
position by tightening an internal grub screw.
The bridge has six independent titanium saddles the height of
which can be adjusted using two small allen screws in the leading edge.
Intonation of each string is adjusted with a screw through the back of
the tremolo plate into the saddle. The string spacing is 10.5mm for an
E-to-E spread of 2-1/8″ (54mm). The studs are spaced at 56mm. A 42mm
deep machined steel sustain block extends beneath the bridge.
The 5.5mm diameter removable stainless steel arm is retained by a
nylon collar which allows for tension adjustment. In addition to the
supplied arm, the arm from the original tremolo (including the can be used in this tremolo.
The design of the T1802 is based on the venerable Gotoh 510T
tremolo which is quite similar except for the titanium saddles. The
T1802 is used on the among other models.
Ibanez Tremolo unit T1802 – chrome
€ 599,00
inkl. MwSt. zzgl. Versandkosten
Ibanez
Lieferzeit: ca. 3-5 Tage
Verfügbar bei Nachbestellung
Beschreibung
2TR6002R-CH
The T1802 is a type of bridge produced for Ibanez by Gotoh. It was introduced in 2018 along with the .
The T1802 is a dual-point tremolo with a pair of studs mounted in
the guitar body upon which a knife edge rests forming the fulcrum on
which the tremolo pivots. The height of the bridge can be adjusted by
turning the mounting studs in or out. The studs can be locked into
position by tightening an internal grub screw.
The bridge has six independent titanium saddles the height of
which can be adjusted using two small allen screws in the leading edge.
Intonation of each string is adjusted with a screw through the back of
the tremolo plate into the saddle. The string spacing is 10.5mm for an
E-to-E spread of 2-1/8″ (54mm). The studs are spaced at 56mm. A 42mm
deep machined steel sustain block extends beneath the bridge.
The 5.5mm diameter removable stainless steel arm is retained by a
nylon collar which allows for tension adjustment. In addition to the
supplied arm, the arm from the original tremolo (including the can be used in this tremolo.
The design of the T1802 is based on the venerable Gotoh 510T
tremolo which is quite similar except for the titanium saddles. The
T1802 is used on the among other models.
Zusätzliche Informationen
Brand New
Ibanez
Tremolo unit T1802 – chrome
ProMusic
Ähnliche Produkte
Ibanez Tremolo FAT10 – chrome
inkl. MwSt.
zzgl. Versandkosten
Lieferzeit: ca. 3-5 Tage
Mehr DetailsIbanez Tremolo Edge Pro – Powder cosmo
inkl. MwSt.
zzgl. Versandkosten
Mehr DetailsIbanez EFAT-10 Tremolounit – black
inkl. MwSt.
zzgl. Versandkosten
Lieferzeit: ca. 3-5 Tage
Mehr Details